Home | 简体中文 | 繁体中文 | 杂文 | Search | ITEYE 博客 | OSChina 博客 | Facebook | Linkedin | 作品与服务 | Email

8.2. interface

		
firewall-> get interface all
box is not in pure_l2_mode

A - Active, I - Inactive, U - Up, D - Down, R - Ready

Total interface: 12
Name           IP Address         Zone        MAC            VLAN State VSD
trust          192.168.3.1/24     Trust       001f.1255.a902    -   U   -
untrust        61.144.230.41/29   Untrust     001f.1255.a901    -   U   -
serial         0.0.0.0/0          Null        001f.1255.a906    -   D   -
tun.1          unnumbered         Untrust     untrust           -   D   -
vlan1          0.0.0.0/0          VLAN        001f.1255.a90f    1   D   -
null           0.0.0.0/0          Null        N/A               -   U   0
firewall->
		
		

8.2.1. PPPoE

set pppoe name "PPPoE"
set pppoe name "PPPoE" username "cjf0000@163.gd" password "yVizHVPmNgsYRvCpTP7RsQnxg2VpbQ=="
set pppoe name "PPPoE" idle 0
set pppoe name "PPPoE" interface untrust
set pppoe name "PPPoE" auto-connect 30
			

8.2.2. 接口模式

set interface eth4 nat    //将接口4设置为nat模式
set interface eth4 route  //将接口4设置为路由模式
			

Route between multiple subnets without a router

set interface trust ip (ip address) (subnet mask) secondary [Enter]
save [Enter]
			

8.2.3. vlan

set zone name office //建立一个3层的zone,名为Office
set zone name L2-office  L2 1   //建立一个2层的zone,名为L2-Office(二层接口必须以L2-开始命名),vlan id 为1。
set interface eth4 zone office   //将接口4设置为office  zone的接口。
set interface vlan1 ip 10.10.10.10/24  //将vlan1的ip设置为10.10.10.10
set interface vlan1 manage web  //开通vlan1接口的web管理功能
set interface vlan1 manage ping  //开通vlan1接口的ping功能
			

8.2.4. MIP

set interface eth3 mip 1.1.1.1 host 2.2.2.2 vrouter trust-vr   //设置mip,外网ip1.1.1.1 绑定到内网ip 2.2.2.2上
unset interface eth3 mip 1.1.1.1   //取消1.1.1.1的mip设置
			
unset interface "untrust" mip 61.144.230.44
set interface "untrust" mip 61.144.230.44 host 192.168.3.46 netmask 255.255.255.255 vr "trust-vr"

set policy from "Untrust" to "Trust"  "Any" "MIP(61.144.230.44)" "HTTP" permit log

policy id = 79

set policy id 79
set service "HTTPS"
exit
			

8.2.5. VIP

set interface eth3 vip untrust-ip + 21 ftp 192.168.0.10       //设置vip
set interface eth3 vip untrust-ip + 8000 ftp 192.168.0.10
			
set service "OpenSSH" protocol tcp src-port 0-65535 dst-port 22-22

set interface untrust vip 61.144.230.45 + 22 OpenSSH 192.168.3.10

set policy from untrust to trust any vip(61.144.230.45) OpenSSH permit

save
			
comments powered by Disqus