Home | 简体中文 | 繁体中文 | 杂文 | 打赏(Donations) | ITEYE 博客 | OSChina 博客 | Facebook | Linkedin | 知乎专栏 | Search | Email

8.11. HBA

# dmesg | grep QLogic
QLogic Fibre Channel HBA Driver: 8.03.01.05.06.0-k8
 QLogic Fibre Channel HBA Driver: 8.03.01.05.06.0-k8
  QLogic QLE2562 - PCI-Express Dual Channel 8Gb Fibre Channel HBA
 QLogic Fibre Channel HBA Driver: 8.03.01.05.06.0-k8
  QLogic QLE2562 - PCI-Express Dual Channel 8Gb Fibre Channel HBA


# dmesg | grep qla
qla2xxx 0000:04:00.0: PCI INT A -> GSI 38 (level, low) -> IRQ 38
qla2xxx 0000:04:00.0: Found an ISP2532, irq 38, iobase 0xffffc90016e76000
qla2xxx 0000:04:00.0: irq 61 for MSI/MSI-X
qla2xxx 0000:04:00.0: irq 62 for MSI/MSI-X
qla2xxx 0000:04:00.0: Configuring PCI space...
qla2xxx 0000:04:00.0: setting latency timer to 64
qla2xxx 0000:04:00.0: Configure NVRAM parameters...
qla2xxx 0000:04:00.0: Verifying loaded RISC code...
qla2xxx 0000:04:00.0: firmware: requesting ql2500_fw.bin
qla2xxx 0000:04:00.0: FW: Loading via request-firmware...
qla2xxx 0000:04:00.0: Allocated (64 KB) for FCE...
qla2xxx 0000:04:00.0: Allocated (64 KB) for EFT...
qla2xxx 0000:04:00.0: Allocated (1350 KB) for firmware dump...
qla2xxx 0000:04:00.0: Unable to read FCP priority data.
scsi0 : qla2xxx
qla2xxx 0000:04:00.0:
qla2xxx 0000:04:00.1: PCI INT B -> GSI 45 (level, low) -> IRQ 45
qla2xxx 0000:04:00.1: Found an ISP2532, irq 45, iobase 0xffffc90016e06000
qla2xxx 0000:04:00.1: irq 63 for MSI/MSI-X
qla2xxx 0000:04:00.1: irq 64 for MSI/MSI-X
qla2xxx 0000:04:00.1: Configuring PCI space...
qla2xxx 0000:04:00.1: setting latency timer to 64
qla2xxx 0000:04:00.1: Configure NVRAM parameters...
qla2xxx 0000:04:00.1: Verifying loaded RISC code...
qla2xxx 0000:04:00.1: FW: Loading via request-firmware...
qla2xxx 0000:04:00.1: Allocated (64 KB) for FCE...
qla2xxx 0000:04:00.1: Allocated (64 KB) for EFT...
qla2xxx 0000:04:00.1: Allocated (1350 KB) for firmware dump...
qla2xxx 0000:04:00.1: Unable to read FCP priority data.
scsi1 : qla2xxx
qla2xxx 0000:04:00.1:
qla2xxx 0000:04:00.0: LIP reset occurred (f700).
qla2xxx 0000:04:00.1: LIP reset occurred (f700).
qla2xxx 0000:04:00.0: LOOP UP detected (8 Gbps).
qla2xxx 0000:04:00.1: LOOP UP detected (8 Gbps).